Wednesday, August 21, 2019

Traffic Congestion In Toronto Tourism Essay

Traffic Congestion In Toronto Tourism Essay Transportation is crucial in any town or city. Toronto is no exception. In the past several years, population growth rate has been high. Transportation systems therefore need to be upgraded to accommodate this demand. Toronto has over the years been known to have two seasons which include winter and construction seasons. The construction period implies the time when there are many constructions while the winter period is a time when traffic congestion reduces drastically. This refers to the traffic congestion menace in Toronto. Construction related delays have been common in Toronto due to politicization. Municipal infrastructure needs to be maintained in Toronto and other cities in Canada. Toronto replenishes its roads twice before reconstruction after every 60 years. This makes most roads deplorable amidst heavy demand by commuters (Chowdhury, 2005). This high demand together with temporary capacity reductions emerges from road crashes and commuter work zones. This paper tries to a ddress the traffic snarl up in Toronto with a view of finding a solution to this menace. Problem Statement Traffic related problems account for loss of seven to ten hours weekly for Torontians. These problems include traffic congestion and bad conditions of roads. . Traffic congestions in Toronto roads normally occur during the day and delays more passengers and goods than it delays used to be. It is reported that the average delay per peak traveler has moved from 15 hours in 1982 to 45 hours in 2002 each year (Buzzelli, 2001). Apparently, the figure has tripled within 20 years. It equates to the number of hours spent in working for the whole year. Traffic congestion is a paralyzing incident for the city and which gets worse day by day. Torontonians spend approximately seven to ten hours a week in traffic due to traffic related problems (Sewell, 2009). Examples of these problems range from traffic congestion to bad road conditions. For some, seven to ten hours may be seen as an honor- a short time menace. To others, this is a soul-sucking grind. Traffic congestions in Toronto roads normally occur during the day and delays more passengers and goods than it delays used to be. It is reported that the average delay per peak traveler has moved from 15 hours in 1982 to 45 hours in 2002 each year (Buzzelli, 2001). Apparently, the figure has tripled within 20 years. It equates to the number of hours spent in working for the whole year. Traffic congestion is a paralyzing incident for the city and which gets worse day by day. The traffic menace in the Toronto is rather a complex affair. Bicycles, cars, taxies, delivery trucks, buses, and pedestrians compete in using the same road at the same time. Standing traffic causes an increase in air and noise pollution. Bicycle lanes are placed in unfit locations that do not connect to other routes. This wastes money and space. The lanes are also unsafe to use.  The change in traffic routes and failure to enforce rules for parking and stopping of vehicles are major causes of traffic congestion too. The removal of parking lanes has also caused an overall drop in revenue from business (Vigar, 2002).   High Economic costs of Toronto are attributed to traffic congestions. The hours lost by employees in traffic jams or waiting for arrival of delivery buses are raising eye brows. During these congestions, there is increased use of fuel. This loss can be approximated as $2.0 billion annually (Statistics Canada Paragraph 16). On average a typical commuter currently spends more than 79 minutes currently getting to and from their workplaces as compared to 68 hours in 1990s. Additionally, health effects related to congestion are on the increase. Research has revealed that each year, there are approximately 440 premature deaths and around 1,700 other victims hospitalized in Toronto. These problems related to congestion are broad, big and complex and require great solutions to be eliminated permanently. Reasons for Traffic Congestion in Toronto Sharing of the road by motor cycles, bicycles, and all kinds of vehicles is a common characteristic in Toronto. Lanes for bicycles are placed on sidewalks and major thoroughfares. This makes pedestrians have difficulties in walking since bicycles occupy the sidewalks causing congestion. This also causes a reduction in parking and stopping spaces for cars in the city. Additionally, traffic and parking laws are not evenly enforced. The laws are effected on some vehicles but not on all road users this is a contributing factor to congestion, increased insurance costs and frayed tempers. Health problems and money wasted for gas and insurance are on the rise because of rise in traffic congestion (Mehr, 2005). During the construction period, traffic congestion is always on the rise. Main roads are blocked which causes traffic jams on the remaining roads. These delays are terrible. Moreover, politicians have turned the afflictions of pedestrians into prominent issues that contribute to the unending construction related delays. City mayors have been blamed of bureaucratic incompetence by politicians. This incompetence is said to have brought endless construction related work. The complexities occasioned by the aforementioned only hurts commuters.sub contractors involved during construction have failed to be coordinated which leads to delays too (White, 2009). Commuters have a high demand in road usage. This high demand together with momentary capacity reduction is as a result of road crashes and commuter work zones. These aforementioned causes a high cost of travelling and makes it more frustrating for commuters. The road government organ, federal highway administration (FHWA) with a jurisdiction of administering construction has mentioned congestion as an issue demanding a high priority. Environmental stewardship also known as the agencys vital few are other key priority areas (Vigar, 2002). Feasible Solutions to Traffic Congestion in Toronto This public menace has a potential for improvement. The use of new construction technologies should see Toronto construct its roads quicker or ensure construction does not affect the movement of traffic. For example, lateral drilling machines which eliminate the need for contractors opening up the pavement could be employed. Deployment and development of technologies in the 21st century is also important. These technologies are known as intelligent transportation systems (ITS).this technology could be used to develop the agencys capability to manage transportation systems. On the other hand commercial carriers and travelers will have ability to make informed choices about when and how to travel. Road works done on parallel arteries should also be avoided. The kind of advanced planning should be standard practice for Toronto. There should be coordination in road construction that should not restrict roadways during rush hour (Green, 2001). Traffic congestion should not be taken as a normal state of affairs. Efforts taken into consideration traditionally should be reinforced in addition to focus of FHWA on development and promotion of transportation systems and overall management and operations. Good management and operations should not do away with the need to construct new roads and to add transit capacity appropriately. The management should make most out of existing infrastructure. Retaining an existing vehicle by owners during peak operating condition is better than buying a new one in the operational strategies could be cheaper in implementation than road construction projects. This could help in reduction of traffic congestions and causing a stretch in infrastructure performance (Fisher 1996). Maintenance of municipal infrastructure in Toronto is an issue of great importance. There should be no less than 14 utilities including gas, hydro, phone and cable. These utilities should be used to replace aging equipment in Toronto streets. Despite all this, citizens of Toronto expect more and more from this city since its their right having paid heavy taxes. These disruptions have been there but they are becoming peoples centre of thought (Chowdhury, 2005). There is need to maintain municipal infrastructure in Toronto and this remains a fact not just in Toronto but other Canadian cities as well. There should be no fewer than 14 utilities, which should include gas, phone, hydro and cable. All these utilities should be tearing up Torontos streets to replace other aging equipment. Despite all these, people expect more and more from the city since it is their right after having paid the required taxes to the government. These disruptions have been there but they are becoming the peoples centre of thought (Mehr, 2005). Taking the construction activities for 24hrs is another approach worth exploring. For example the reconstruction of the Gardiner in the 1990s.the metro council back then opted to pay the contractor a premium to ensure that he works 24hrs so that the construction would take a shorter time. Toronto city should aim at constructing ring roads and by-passes. Though these are not common in Toronto city and country side, this can increase the number of roads to cater for the increasing number of vehicles in the roads. Additionally, more super highways should be constructed in addition to the existing ones. This will ensure that they utilize more space upwards and this will enable motor cycles, bikes and cars use specific highways (Green, 2001). Cars on the city centre should be banned; this should be done on busy days. A fee should be introduced for cars that enter the central business district. This will ensure that only public transport enter the city centre to ease the congestion. Private car owner who drive to work will park their cars at designated areas outside the city centre. They then board public transport to the city centre (Fisher, 1996). Creation of multi storey car parks is also important. Highways in city centers will have car parks alongside main roads. Additionally, entrance roads should be wider than countryside roads. By doing this it will create room for car parks. Rules and regulations should also be put in place to ensure that different vehicles are supposed to be parked (Chowdhury, 2005). Synchronization of traffic signals is also important. These signals should be used by all road users including pedestrians. All those breaking the rules by not observing these lights should face certain penalties. Licensing of cyclists should be done by payment of a certain fee. They should also e designated bicycle lanes on the roads where they could cycle. Roads in Toronto are often utilized for rallies marathons and protests. These functions cause congestion and closing of roads which is of no necessity. These functions could utilize the sidewalks or other areas be sought for the same. Exhaust fumes emitted from vehicles during congestion causes air pollution. Car hooting on the other hand causes noise pollution. Hence, keeping traffic in motion at all times is of essence to reduce environmental pollution and save resources. In addition the government should establish policies that are channeled towards reduction of congestion on our roads. Enforcement of these laws should be stri ct with penalties for the breakers of the law (Fisher, 1996). Conclusion Traffic congestion in Toronto is a time bomb waiting to explode. This situation has been occasioned as a result of poor enforcement of transport laws. Politicking also is a major contributing factor to this menace causing delay in construction works. Roads in Toronto are dilapidated too since the city resurfaces its roads after every 60years.the use of Toronto roads for other functions such as rallies which necessitate their closure at those times. Even though this problem seems difficult to solve there is room for improvement. Various solutions could go a long way in trying to solve this menace. New construction technologies need to be explored which will quicken the construction process. Creation of multi storey car parks is also should be considered. This will ensure that car parks are constructed along main roads. A fee should be introduced for drivers who enter the city centre. Commuters should be willing to use public transport to the city centre. Construction of bicycle lanes could help reduce congestion too. Although public transport is the solution to this menace, congestion can further be reduced by use of other means of transport. With the population estimated to increase by nearly 2.6 million, it is apparent that this problem will still persist since more than a million lore cars will be added to the roads. Therefore the commuter time is expected to stretch and the economic cost of congestion doubling. Further the death toll is expected to rise due to traffic causes alongside increase in emissions. In addition the government should enact policies and enforce efficiently. The only way to prevent the city of Toronto from coming to a standstill is to force people out of their cars by pricing them off.

Tuesday, August 20, 2019

Responses to the Challenge of Amoralism Essay -- Philosophy Philosophi

Responses to the Challenge of Amoralism ABSTRACT: To the question "Why should I be moral?" there is a simple answer (SA) that some philosophers find tempting. There is also a response, common enough to be dubbed the standard response (SR), to the simple answer. In what follows, I show that the SA and SR are unsatisfactory; they share a serious defect. To the question, "Why should I be moral?" there is a simple answer (SA) that some philosophers find tempting. There is also a response, common enough to be dubbed the standard response (SR), to the simple answer. In what follows I show that SA and SR are unsatisfactory; they share a serious defect. I will interpret "Why should I be moral?" to mean "Why should I habitually perform the outward deeds prescribed by morality? Why, when I’m tempted to cheat or steal, ignore the sufferings of others, or renege on my commitments, should I do what morality calls for, and hence refrain from cheating and stealing, relieve the sufferings of others, and honor my commitments? Why should I go in for such things when so many other lifestyles are possible — for instance, that of a Gauguin or of a master criminal?" Perhaps the question has other meanings, but this is a natural one, and one to which SA and SR are meant to apply. Interpreting the question this way removes some unclarity from the phrase "be moral." But it removes no ambiguities that might stem from the word "should." SA and SR purport to do this. SA, briefly put, is this: "Why should I be moral?" is either a request for a moral reason to be moral or a request for another type of reason (or perhaps a motive) to be moral. In the first case it is absurd; in the second it is unreasonable or in some other way illegitimate.... ...t then, a page later, assumes without argument that altruistic considerations provide everyone with prima facie reasons to act. Understandably, he then treats "Why should I be moral?" as something more complicated than a request for a reason. The trouble is that Sterba’s "altruistic reasons" are among the things Foot calls moral considerations. Thus, he has not engaged Foot’s argument; he has made exactly the assumption her argument challenges. (9) A similar objection has been used against Foot. See Robert L. Holmes, "Is Morality a System of Hypothetical Imperatives?" Analysis 34 (1973): 96–100. Foot’s reply to it, which differs from mine, is in "‘Is Morality a System of Hypothetical Imperatives?’ A Reply to Mr. Holmes," Analysis 35 (1974): 53–56. (10) I discuss these and related distinctions in "Motivation and Practical Reasons," Erkenntnis 47 (1997): 105–27. Responses to the Challenge of Amoralism Essay -- Philosophy Philosophi Responses to the Challenge of Amoralism ABSTRACT: To the question "Why should I be moral?" there is a simple answer (SA) that some philosophers find tempting. There is also a response, common enough to be dubbed the standard response (SR), to the simple answer. In what follows, I show that the SA and SR are unsatisfactory; they share a serious defect. To the question, "Why should I be moral?" there is a simple answer (SA) that some philosophers find tempting. There is also a response, common enough to be dubbed the standard response (SR), to the simple answer. In what follows I show that SA and SR are unsatisfactory; they share a serious defect. I will interpret "Why should I be moral?" to mean "Why should I habitually perform the outward deeds prescribed by morality? Why, when I’m tempted to cheat or steal, ignore the sufferings of others, or renege on my commitments, should I do what morality calls for, and hence refrain from cheating and stealing, relieve the sufferings of others, and honor my commitments? Why should I go in for such things when so many other lifestyles are possible — for instance, that of a Gauguin or of a master criminal?" Perhaps the question has other meanings, but this is a natural one, and one to which SA and SR are meant to apply. Interpreting the question this way removes some unclarity from the phrase "be moral." But it removes no ambiguities that might stem from the word "should." SA and SR purport to do this. SA, briefly put, is this: "Why should I be moral?" is either a request for a moral reason to be moral or a request for another type of reason (or perhaps a motive) to be moral. In the first case it is absurd; in the second it is unreasonable or in some other way illegitimate.... ...t then, a page later, assumes without argument that altruistic considerations provide everyone with prima facie reasons to act. Understandably, he then treats "Why should I be moral?" as something more complicated than a request for a reason. The trouble is that Sterba’s "altruistic reasons" are among the things Foot calls moral considerations. Thus, he has not engaged Foot’s argument; he has made exactly the assumption her argument challenges. (9) A similar objection has been used against Foot. See Robert L. Holmes, "Is Morality a System of Hypothetical Imperatives?" Analysis 34 (1973): 96–100. Foot’s reply to it, which differs from mine, is in "‘Is Morality a System of Hypothetical Imperatives?’ A Reply to Mr. Holmes," Analysis 35 (1974): 53–56. (10) I discuss these and related distinctions in "Motivation and Practical Reasons," Erkenntnis 47 (1997): 105–27.

Monday, August 19, 2019

Neolithic Pottery :: essays research papers

Neolithic is of or relating to the cultural periods of the Stone Age beginning around 10,000 B.C. in the Middle East and later elsewhere, characterized by the development of agriculture and the making of polished stone artifacts. The Neolithic Period is also called the New Stone Age. Many water pots and ceramic figures were found in the ruins of Neolithic society plots of earth. People of Neolithic times made many artifacts that were symbolic of their ways of life and culture such as water pots, fish, hunting and medical objects. Out of the artifacts found from the Neolithic period, the fish is symbolic to me because of the times spent with my father during fishing trips.   Ã‚  Ã‚  Ã‚  Ã‚  The Neolithic Period extended from 10,000 B.C. to 3,000 B.C. It is also called the New Stone Age, and many new Advances and changes took place in this time. Unlike the nomadic life of the Old Stone Age, the New Stone Age was the dawning of settled life. People lived more towards lakes and river instead of caves and tree trunks. The change in environment led to the change of jobs, society, and culture. Neolithic everyday objects reveal that fishing and hunting were the main occupations of the people. Neolithic art is represented by a large number of objects found in isolated areas in Eastern Europe, Siberia and Central Asia. Neolithic people decorated clay water vessels in a wide variety of ways that were very large and colorful. They also created bone, horn and wooden figurines of people and animals. The Earliest Neolithic pottery found in Siberia and Central Asia is similar to pottery found in northern Britain, suggesting that early Neolithic colonist may have co me to Ireland from northern Britain. The pottery bowls were made by winding coils of clay in a circle to form the sides of the bowl, smoothing them, and finally firing them on an open fire. After the making of these vessels were mastered, pottery was decorated with dots or lines in the surface of the clay.   Ã‚  Ã‚  Ã‚  Ã‚  Neolithic people lived near rivers and lakes. The artifacts and life in the water became and important part of their lives by supporting them with food, cleansing and ceremonial artifacts such as fish and shells. Fishing was an important job, and way of life because the abundance of fish fed entire villages. The fish were appreciated so much to the Neolithic people that they began making clay fish, as a symbol for their way of life.

Sunday, August 18, 2019

al capone , a true american hero :: essays research papers

Al Capone was one of the greatest American gangsters in history. â€Å"Even though he was unbelievable smart, he dropped out of school, he dropped out of school at age 14 in the 6 Th. grade. (Kobler, John. Capone: The Life and World of Al Capone.) He got involved with crime at a very early age, and he never failed to stir up trouble. Between working 3 jobs and being in a gang, Capon had much worse problems to deal with. Problems like shelter when nighttime came. He later graduated to the notorious Five Points Gang in Manhattan where he ended up working at the â€Å"Yale’s Brooklyn Dive’, with another gangster named Frankie Yale. (Schoenberg, Robert J. Mr. Capone: The Real-and Complete). He also worked at the Harvard Inn as a bartender and bouncer. It was there he received his nickname â€Å"Scare Face† His infamous facial scars were received when he got into a brawl with a patron's brother. Cappone ended up meeting his future wife and mother to his child in 19 18. He Mary â€Å"Mae† Coughlin at a dance on December 4, 1918. Then (Alsop, Kenneth. The Bootleggers). Cappone’s and Mae got married that year and his first son was born. One thing about Cappone was that no matter the crime he always had an alibi. Cappone also had his own famous killing style. This involved his men renting an apartment across the street from the home of the victim and shooting im when he came out. Cappone’s first arrest was a disorderly conduct charge while he was working for Yale. He murdered a lot of men in NYC because of gangster etiquette â€Å"no one ever saw a thing†. Cappone's combination of physical strength and intelligence encouraged his protege. (Nash, J. Blood Letter and Bad Men). Soon Cappone was helping another gangster who went my Torio; He helped mange his bootlegging business. Cappone’s most notorious killing was the St. Valentines Massacre (Bowettiger, John. Lake Jingle: Chicago on the Spot) On February 4th 1929 four of Cappone’s men entered a garage at 2122 North Clark Street. Because two of Cappone’s men were dressed like policemen the victims put their hands up, dropped their weapons and were immediately shot. Cappone’s men fired over 150 shots into those men. Cappone eventually got nailed for not paying his taxes and the judge that heard his case sent him to prison. al capone , a true american hero :: essays research papers Al Capone was one of the greatest American gangsters in history. â€Å"Even though he was unbelievable smart, he dropped out of school, he dropped out of school at age 14 in the 6 Th. grade. (Kobler, John. Capone: The Life and World of Al Capone.) He got involved with crime at a very early age, and he never failed to stir up trouble. Between working 3 jobs and being in a gang, Capon had much worse problems to deal with. Problems like shelter when nighttime came. He later graduated to the notorious Five Points Gang in Manhattan where he ended up working at the â€Å"Yale’s Brooklyn Dive’, with another gangster named Frankie Yale. (Schoenberg, Robert J. Mr. Capone: The Real-and Complete). He also worked at the Harvard Inn as a bartender and bouncer. It was there he received his nickname â€Å"Scare Face† His infamous facial scars were received when he got into a brawl with a patron's brother. Cappone ended up meeting his future wife and mother to his child in 19 18. He Mary â€Å"Mae† Coughlin at a dance on December 4, 1918. Then (Alsop, Kenneth. The Bootleggers). Cappone’s and Mae got married that year and his first son was born. One thing about Cappone was that no matter the crime he always had an alibi. Cappone also had his own famous killing style. This involved his men renting an apartment across the street from the home of the victim and shooting im when he came out. Cappone’s first arrest was a disorderly conduct charge while he was working for Yale. He murdered a lot of men in NYC because of gangster etiquette â€Å"no one ever saw a thing†. Cappone's combination of physical strength and intelligence encouraged his protege. (Nash, J. Blood Letter and Bad Men). Soon Cappone was helping another gangster who went my Torio; He helped mange his bootlegging business. Cappone’s most notorious killing was the St. Valentines Massacre (Bowettiger, John. Lake Jingle: Chicago on the Spot) On February 4th 1929 four of Cappone’s men entered a garage at 2122 North Clark Street. Because two of Cappone’s men were dressed like policemen the victims put their hands up, dropped their weapons and were immediately shot. Cappone’s men fired over 150 shots into those men. Cappone eventually got nailed for not paying his taxes and the judge that heard his case sent him to prison.

Saturday, August 17, 2019

Geomatics : Levelling

Topic 2: Levelling Aims -Heights, datums and bench marks -Levelling equipment -Field procedure for levelling -Calculating reduced levels -Sources of error in levelling -Other levelling methods Levelling – how heights are defined Engineering surveying involves the measurement of three quantities; heights, angles and distances. Levelling it the process of measuring heights. It is possible when levelling to measure heights with an accuracy of millimetres Heights can also be measured using total stations, handheld lasers and GPS devices.However, levelling offers an inexpensive, simple and accurate method for measuring heights, and it is widely used in construction sites. Any method of measuring the heights of points above or below the ground using an agreed datum. These datum's or reference points are present in all construction sites and has an arbitrary height assigned to the point. Most construction sites will have several of these benchmarks, and if they have heights based on an arbitrary datum, they are known as Temporary Bench Marks. Heights Heights are defined using horizontal and vertical lines.The figure below shows a plumbbob suspended at point P, the direction of gravity along the plumb-line defines the vertical at point P. A horizontal or level line is any line at right angles to this For site work, any horizontal line can be chosen as a datum for heights and for levelling. The height of a point is measured along the vertical above or below the chosen datum. The height of a point relative to a datum is known as its reduced level (RL). On most construction sites there is a permanent datum. The horizontal line or surface passing through this, with its height, becomes the levelling datum.The height of the datum can be arbitrary, a value often used for this is 100. 000m. This is chosen to avoid any negative heights occurring. Any reference point on site which has had a height assigned to it is known as a bench mark. For most surveys and construction work, several bench marks would normally be established by levelling from the datum. If heights are based on an arbitrary datum these are known as Temporary Bench Marks or TBMs. Curved Surfaces Level (or horizontal) lines are always at right angles to the direction of gravity. The direction of gravity is generally towards the centre of the earth.Over large areas, as the Earth is curved, level surfaces will also be curved. For these, a height difference is measured along a vertical between two curved level surfaces. When surveying over a large area, a curved level surface of zero height has to be defined. This has been established by the Ordnance Survey, this is called the Ordnance Datum (OD). This corresponds to the average sea level measured Poolbeg or Malin Head. Heights based on these are know as OD heights. The levelling staff Levelling involves measuring vertical distances with reference to a horizontal plane or surface.To do this, a levelling staff is needed to measure vertica l distances and an instrument known as a level is required to define the horizontal plane. Many types of staff are used with varying lengths and different markings. The E-type face is commonly used in the UK and Ireland. This can be read directly to 0. 01m and by estimation to the nearest mm. The staff must be held vertically – a circular bubble is sometimes fitted to help this. Automatic Level 1. Focusing screw 2. Eyepiece 3. Foot screw 6. Tangent screw 7. Circular bubble Automatic Level 4. Horizontal circle 5. Base plate 8. Collimator (sight) 9. Object lensThe main features of the telescope 1. Object lens 2. Focusing screw 3. Focusing lens 4. Diaphragm 5. Eyepiece The object lens, focusing lens, diaphragm and eye piece are all mounted on an optical axis called the line of collimation or the line of sight. This is an imaginary line which joins the optical centre of the object lens to the centre of the cross hairs. When looking through the eye piece of the surveying telescope , a set of lines called the cross hairs can be seen. These are used for taking measurements from the staff. These cross hairs are etched on a small sheet of glass known as the diaphragm.To make the telescope work, the image of the staff is brought to a focus in the plane of the diaphragm using the focusing screw. The eyepiece is rotated so that the cross hairs are in focus and its focal point is also in the plane of the diaphragm. When looking into the telescope an observer will now see a magnified image of the levelling staff focused against the cross hairs. Parallax Parallax occurs when the focusing screw and the eyepiece is done incorrectly. This condition can be detected by moving the eye to different parts of the eyepiece when reading the staff. If different readings are obtained then parallax is present.To remove parallax, hold a sheet of paper in front of the object and adjust the eyepiece so that the cross hairs are in focus. Then remove the sheet of paper and bring the staf f into focus using the focusing screw. Once again check for parallax by moving your eye around the eyepiece. If parallax is still occurring repeat the adjustment procedure. The compensator In an automatic level, the compensator is mounted on the telescope next to the eyepiece. It will only work when the instrument has been levelled to within about 15’ of the vertical using the foot screws and circular bubble.The function of the compensator is to ensure that the line of sight viewed through the telescope is horizontal even if the telescope is tilted Tilting levels Tilting levels use a spirit level instead of a compensator to establish a horizontal line of sight. When the bubble is centred the sprit level will be horizontal. When the bubble is off centre the axis will be tilted. By attaching a sprit level to the telescope such that its axis is parallel to the line of sight a horizontal line can be set. This is done by using a tilting screw, when this is rotated the telescope is tilted a small amount in the vertical plane.The tilting screw is adjusted until the bubble is centred. Digital levels Digital levels are similar in appearance to automatic levels, a horizontal line is established by a compensator and this is done by centralising a circular bubble with the foot screws. The main difference between this and other levels is that the staff readings are taken and recorded automatically. When levelling, a special bar-coded staff is sighted, and there is no need to sight this staff as the level will do this automatically and display the measurement. It can also display the horizontal distance to the staff.The advantages of digital levels are that observations are taken without the need to read a staff or record anything by hand. Introducing this automation removes two of the most common errors when levelling, reading the staff incorrectly and writing down the wrong value in the field book. The on-board computer also calculates the heights required so that the possibility of making a mistake is removed. This makes the digital level much faster to use. Laser levels Laser levels contain a rotating laser which defines a visible horizontal plane from which distance to the ground can be made and then the height can be determined.Using a level The following steps are taken when using a level to measure heights 1. Set up the tripod 2. Ensure the top is level 3. Push legs firmly into the ground 4. Attach level 5. Use foot screws to centralise the circular bubble 6. Test to see if the compensator is working 7. Remove parallax Once the level is set up its important that the line of sight is horizontal. When the foot screws have been used to centralise the circular bubble, it is assumed that the compensator has set the line of sight to be horizontal.However, most levels are not in perfect adjustment and when levelled their line of sight is never exactly horizontal. If the line of sight is not horizontal when the instrument has been levelled, the level has a collimation error. As most levels will have some level of collimation error, a method is required to check if the error is within acceptable limits. This is known as a two-peg test. This needs to be conducted when using a new or different level for the first time and at regular intervals thereafter. Two peg test Stage 1 On fairly level ground, two points A and B are marked a distance of Lm apart.In soft ground, two pegs are used, on hard surfaces nails or paint may be used. The level is set up midway between the points at C and carefully levelled. A levelling staff is placed at A and B and staff readings S1 (at B) and S2 (at A) are taken. The two readings are: S1 = (S1‘ + x) and S2 = (S2‘ + x) S1‘ and S2‘ are the staff readings that would have been obtained if the line of collimation was horizontal, x is the error in each reading due to the collimation error, the effect of which is to tilt the line of sight by angle ?.Since AC = CB, the error x i n the readings S1 and S2 will be the same. The difference between readings S1 and S2 gives: S1 – S2 = (S1‘ + x) – (S2‘ + x) = S1‘ – S2‘ This gives the true difference in height between A and B. This demonstrates that if a collimation error is present in a level, the effect of this cancels out when height differences are computed provided readings are taken over equal sighting distances. Stage 2 The level is then moved so that it is L/10m from point B at D and readings S3 and S4 are taken.The difference between readings S3 and S4 gives the apparent difference in height between A and B. If the level is in perfect adjustment then: S1 – S2 = S3 – S4 However this is not always the case and that an error term (e) needs to be estimates e = (S1 – S2) – (S3 – S4) per Lm If the results of these tests show that the collimation error is less than 1mm per 20m (or some specified value). If the collimation error is gre ater than this specified value then the level has to be adjusted. This is normally done by the manufacturer or a trained technician.Example Readings obtained from a two peg test carried out on an automatic level with a staff placed on two pegs A and B 50m apart are: Staff reading at A = 1. 283m Staff reading at B = 0. 860m With the level position 5m from peg B (L/10): Staff reading at A = 1. 612m Staff reading at B =1. 219m Calculate the collimation error of the level per 50m of sighting distance Solution S1= 0. 860M S2 = 1. 283M S3 = 1. 219M S4 = 1. 612M e = (0. 860 – 1. 283) – (1. 219 – 1. 612) per 50M = (-0. 423 – (-0. 393)) = -0. 030M per 50M Exam Question 2007 (5 marks)

Friday, August 16, 2019

Symbols and Motifs in King Lear

The issue of blindness is associated most obviously with Gloucester, who is blinded in the course of the play. It is peculiarly right for Gloucester’s eyes to be the organs through which he is tortured.  Ã‚   Gloucester thought he saw the truth about his sons, but was in fact blind.   With his eyes put out he does indeed see the truth. â€Å"Gloucester before he lost his eyes was spiritually blind, and could not tell the difference between a good son and a bad† (Muir, lx). It is this physical suffering that brings out the long debilitated moral stamina that has underlain his sympathy. Losing his eyes enables him to reach heroic and tragic proportions. He surely has the right to say, â€Å"All dark and comfortless† (III, vii, 84).   There is no irritating shadow of egotism on his accounts of his predicament. And when he learns that Edmund has betrayed him, his response is astonishing and wonderful: â€Å"O my follies!   Then Edgar was abused. / Kind gods, forgive me that and prosper him (III, vii, 90-1).   He knows that his injury to Edgar can never be forgiven:You cannot see your way.I have no way, and therefore want no eyes;I stumbled when I saw†¦.(IV, i, 17-19).Gloucester’s blindness is also a reflection of the unreformed Lear’s arrogant folly, and his inability to tell a good daughter from a bad, until he has been through his own ordeal.The StormIn III, i, the Gentleman gives us an account of Lear’s behaviour which shows him as, in a way, indulging in a sort of theatrical display, enjoying the spectacle of himself suffering in the storm.   The storm seems to appeal to Lear as a sort of melodramatic setting for a display of what is at this point his martyr-like self-pity. â€Å"tears his white hair†¦/ Strives in his little world of man to out-storm / The to-and-fro-conflicting wind and rain† (III, i, 6-10).   But Lear has not yet reached the truth about himself.   This is important be cause it is tempting to see the storm as a symbolic event, and Lear as man in the abstract contending with the forces of evil.   Shakespeare makes us stand back from Lear still, and not identify with him. The real meaning of the storm lies in the thought that it was inhumanly cruel of the daughters to shut him out on such a night.Certainly Kent’s description of the peculiar severity of the storm prompts one to see it as more than just a physical event. He has never in his life seen â€Å"such sheets of fire, such bursts of horrid thunder† (III, ii, 46) etc., and the implication is that the storm has more than natural causes.   This leads Lear to his reflection on the power of the storm to purge evil and crime:   Ã¢â‚¬Å"Let the Great Gods, / That keep this dreadful pudder o’er our heads, / Find out their enemies now†¦Ã¢â‚¬  (IV, ii, 49-51). His growing madness takes the form an obsessive interpretation of all ills in terms of his own personal sufferin gs.   Shakespeare makes sure we see the point: â€Å"this tempest in my mind / Doth from my senses take all feeling else / Save what beats there† (III, iv, 12-14).It is the internal tempest that matters in the drama, and the way it brings Lear to some sort of wisdom. The wildness of the elements leads him to a great advance when he sees Edgar as elemental man. Here real truth starts to appear to him: â€Å"Is man no more than this?†¦ unaccommodated man is no more but such a poor, bare, forked animal as thou art† (III, iv, 105-111).  Ã‚   He sees, for the first time, beyond the surface of things, and understands the folly of snobbery and blind selfishness in human life. His own trappings of pomp are vain, he sees himself as deluded, and Edgar as the truth.MadnessLear’s collapse into madness is his way to transformation.   One of his mad notions is to imagine the mock trial of the sisters.   The symbolic force of this is evident:(To Edgar)   Thou, r obed man of justice, take thy place.(To the Fool)   And thou, his yoke fellow of equity,Bench by his side.   (To Kent)   You are o’th’commission;Sit you too. (III, vi, 37-40).Here is a Christian inversion of the social order; a mad beggar, a fool, and an exiled man are set up over the mighty to sit in judgement on them.   It is a mad fancy of Lear’s, but it has a deep significance in the criticism of false sophistication that the play poses.   An unjust society has helped Lear to be an egotist and to do evil, as Kent said in the first scene.   Now Lear is learning and regrets his own â€Å"sophistication† in the face of Edgar, â€Å"the thing itself†.   What he is learning is the need for humility, and respect for others, and the importance of setting one’s eyes on the real truths of human existence if one is to live decently and with meaning. The knowledge Lear gains is percolated through his madness.But Gloucester does not go mad.   He endures everything.   As he learns from Edgar’s lesson on the â€Å"cliff†, it is not man’s right to choose his end. The point of that strange scene seems to be summarised at the end by Gloucester’s description of their relative fates:The King is mad: how stiff is my vile senseThat I stand up, and have ingenious feelingOf my huge sorrows!   Better I were distract:So should my thoughts be sever’d from my griefs,And woes by wrong imaginations loseThe knowledge of themselves. (IV, vi, 28106)  Ã¢â‚¬Å"I suggest that through him we grasp the central thread, which has to do with love and suffering and sticking it out to the end†¦ Lear is spared the worst. Gloucester gets it† (Mason, 1970, p.200).In Lear’s crazed mind all authority is in the hands of those who are unworthy.   It is only their established power, their rank and ceremonial clothes that distinguish the judges from the accused.   Morality is cynically ig nored.   Only selfishness rules.   â€Å"Let copulation thrive† – and the world in Lear’s distorted mind looks very like that presupposed by Edmund’s view of nature, a sort of jungle of self-interest, power and lust.BetrayalWhen Cordelia refuses to do what her foolish father wants in the first scene she invokes the idea of the bond. â€Å"I love your majesty / According to my bond† (I, i, 92-3) And by â€Å"bond† she means something quite different from the â€Å"bondage† that he interprets it as.   The question of the bonds of human relationships is central to the play; why human beings fail in their bonds, as the daughters do with Lear, and Edmund does with his father is the horrific mystery that Shakespeare cannot solve.   Cordelia goes on to spell out, in an embarrassed way – she had always thought it was obvious – what she means by â€Å"bond†.It is the natural range of duties and affection that exist between children and parents.   Kent too speaks of another bond, the sacred responsibilities of service. â€Å"Royal Lear, / Whom I have ever honour’d   as my King, / Lov’d as my father, as my master follow’d†¦Ã¢â‚¬  (I, i, 139-141).   It is the betrayal of these bonds that causes such chaos in the moral world of King Lear, of which Jan Kott says â€Å"There is neither Christian heaven, nor the heaven predicted by humanists.   King Lear makes a tragic mockery of all eschatologies† (Kott, 1967, p.116).Edmund’s speech in I, ii is plain because his thought is plain.   There is no hesitation in him because there are no doubts, and no traces of decent feeling in him at all.   He is utterly conscienceless.   Nothing in him works to check the urge of ruthlessness. His closeness to the sisters is clear.   His â€Å"Nature†, it is pretty obvious, is a different concept from that assumed in Cordelia’s definition of the n atural â€Å"bonds† of feeling and duty which underlie decent society.   It is, for him, nature as expressed in the law of the jungle – naked self-interest and the pursuit of power.   He is appalling in his plainness.   The sisters are equally ready to betray normal ties. It is astonishing to hear Regan’s total failure to respond to Lear’s appeals for sympathy.   After all, however absurd his selfishness, he is her father.   But she responds, as does Goneril, like a machine, with an icy formality of tone which is the voice of cold reason.O, Sir! you are old,Nature in you stands on the very vergeOf her confine: you should be rul’d and ledBy some discretion that discerns your stateBetter then you yourself. (II, iv, 147-151).We might be tempted to agree with Bradley that â€Å"in that dark cold world some fateful malignant influence is abroad, turning the hearts of the fathers against their children and of the children against their fathers † (Bradley, 214). But the bonds are not always betrayed. A notable incident   in III, vii, the scene in which Gloucester is blinded, is the intervention of the servant. He acts purely on a humane instinct of decency, knowing in his soul that such conduct as Cornwall’s is not tolerable in a human world. He invokes the sacred bond of service, just as Kent did to Lear :â€Å"Hold your hand, my lord! /   I have served you ever since I was a child; / But better service have I never done you /   Than now to bid you hold† (III, vii, 71-4). The point here – the infinitely blessed and optimistic point – is that this man is not a hero, but simply a decent human being.   But he is ready to die in defense of a tolerable worldWorks CitedBradley, A.C.   Shakespearean Tragedy.   London: Macmillan, Second edition, 1905.Kott, Jan, Shakespeare Our Contemporary, translated by Boleslaw Taborski, London, Methuen, 2nd edition 1967.Mason, H.A., Shakespeareâ₠¬â„¢s Tragedies of Love, London, Chatto and Windus, 1970.Shakespeare, W.   The Arden Shakespeare: King Lear. Ed. Kenneth Muir. London: Methuen, 1980.

The Driverless Car Revolution

A) Some of the world’s cleverest scientists and engineers are pioneering a new generation of driverless cars that will change our lives as much as the internet has already done. B) The idea of self-driving vehicles will sound like science-fiction to many, but the prototypes already work, using 360-degree sensors, lasers, learning algorithms and GPS to navigate streets in an astonishingly precise fashion. They are likely to go mainstream in 15 to 20 years’ time and are a genuinely exciting, game-changing breakthrough that refute the myth that our economy has ceased to spawn major technological innovations. Google’s vehicles have already driven more than 400,000 miles without an accident and are beginning to be legalised in US states.C) The technology could trigger a burst of economic growth, transform transport around the world, free vast amounts of time, increase productivity, make us a lot wealthier and unleash drastic, unpredictable economic and cultural change s. By allowing people to relax or work as they commute, they will deal a devastating blow to public transport in all but the densest, most congested areas.D) The biggest US think-tanks, universities, forecasters and corporations are busily trying to work out how, not if, the world will change as a result of driverless cars, and who the winners and losers will be.E) Driverless cars will have huge advantages. Commuting will become useful, productive time, saving many people two or more hours a day that are currently wasted. The number of accidents will fall by at least 90pc, scientists believe, preventing thousands of deaths, by controlling distances between vehicles, braking automatically and eliminating human errors and reckless driving. The superior safety of driverless cars means that it ought to be possible to reduce their weight, cutting back on fuel consumption, and to redesign car shapes, making them more like living rooms. Even car sickness could be reduced, with smoother dri ving.F) The dynamics of commuting will change as it will no longer be necessary to  find a parking space on arrival: the driverless car could either park itself at some distance from the workplace or even return home, before picking up the passenger in the evening. Fewer people may want to own cars, with rental becoming more attractive. This could allow residential parking areas to be put to other uses.G) The look and feel of roads and towns will drastically change. It will be possible to cram in far more cars into existing roads, driving at much faster speeds. Simulations of intelligently controlled intersections from the University of Texas suggest that they perform 200 to 300 times better than current traffic signals. Self-driving vehicles will have the ability to â€Å"platoon†, acting almost like train carriages on motorways, increasing lane capacity by up to 500pc, according to research from the US Institute of Electrical and Electronics Engineers.H) Far more people w ill travel at night, sleeping at the same time, especially for longer trips such as holidays, reducing the demand for train and short-haul plane journeys. Driverless cars will once again boost the value of suburbs and country living, and their house prices: far more people will be willing to commute much longer distances to work or school. This will encourage cities to become even more sprawling, putting massive  pressure on existing planning rules. The premium on living centrally will be reduced, albeit not eliminated because of congestion, which means there will still be a need for some urban rail services.I) The transition process will inevitably be painful. Like all technological shifts, self-driving vehicles will threaten some existing jobs, including that of many professional drivers, though consumers will have more money to spend on other things, creating employment in those areas.Which paragraphs contain the following information? 1. It is predicted that many lives will be saved. 2. Prototypes have already been tested successfully. 3. Motorways will be used more efficiently. 4. The impact on transport by rail and plane. 5. Drawbacks for certain professions.